Skip to main content

Write a Review

$1.00
Service parts for Fox suspension.
$15.00
Bottom bracket center sleeves act as an additional seal and protect your bottom bracket bearings from water and other foreign contaminants that make their way into your frame.
$15.00
Bottom bracket center sleeves act as an additional seal and protect your bottom bracket bearings from water and other foreign contaminants that make their way into your frame.
$15.00
Bottom bracket center sleeves act as an additional seal and protect your bottom bracket bearings from water and other foreign contaminants that make their way into your frame.
$15.00
Bottom bracket center sleeves act as an additional seal and protect your bottom bracket bearings from water and other foreign contaminants that make their way into your frame.
$15.00
Air spring seal kits for Fox suspension repair and rebuild.
$15.99 - $29.99
- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested
$19.99
- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each
$20.00
Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild
$24.99
•Side pull brake •Includes lever, caliper, cable and housing •Forged aluminum construction •Includes replacement bolt for mounting on fork
$26.00
Dimension Mountain Compe Pedals. - Forged aluminum body - Accepts toe clips - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 335g
$27.00 - $36.00
When it's time to replace your old 8-speed cassette, check out SRAM's PG-850. Its steel construction and SRAM's PowerGlide technology combine to deliver miles of solid shifting and outstanding durability.
$29.99 - $34.99
SRAM’s 11-speed chain features heavily chamfered outer plates for improved shifting and quiet running. And, with its great PowerLock connecting link, installation and removal is a snap.
$29.99
- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested
$31.00
Our 1-1/8" NoThreadSet bearing cap features our patented GripLock (US Patent 8662517) retention design for exclusively reliable headset adjustment.
$31.00
Our 1-1/8" NoThreadSet bearing cap features our patented GripLock (US Patent 8662517) retention design for exclusively reliable headset adjustment.
$35.00
Baseplates for DropSet integrated headsets.
$35.00
Baseplates for DropSet integrated headsets.
$35.00
Baseplates for DropSet integrated headsets. 52mm 45 degree fits DropSet 1, 2 & 5
$44.99
Genuine replacement parts Revive your ride with a fresh set of bearings for your BB90/95 equipped carbon bike. Proprietary replacement bottom bracket for the Trek family of bikes. - Only compatible with 24mm cranks - Not compatible with BB30 cranks
$46.00
Our DropSet bearing cap features our patented GripLock (US Patent 8662517) retention design for exclusively reliable headset adjustment. Fits DropSet 2, 3, and 4 only.
$50.00
Replacement air valve assemblies for Fox suspension.
$59.99
SRAM's 1071 chain is lightweight, smooth, and precise-shifting. It features the PowerLock connecting link and HollowPin construction for weight savings with no sacrifice of strength. - SRAM Road 10-speed compatible - HollowPin construction for weight savings with no sacrifice of strength - Features the PowerLock connecting link
$65.00 - $81.00
Bearings for Chris King DropSet headsets. Chris King made-in-house bearings are designed to last a lifetime and are fully serviceable. We encourage you to service your bearings before resorting to replacement. 41mm Steel—PHS804 (Fits DropSet 3) 42mm Steel—PHS806 (Fits DropSet 2 and DropSet 4) 52mm 45° Steel—PHS808 (Fits DropSet 2) 52mm 36° Steel—PHS810 (Fits DropSet 3)
$79.99 - $85.00
Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings. - 352 grams (pair)
$99.99
Transfer Dropper Post Remote A lightweight below-the-bar design for 1x drivetrains. FOX Transfer post levers provide smooth action and reduced force, providing consistent actuation pressure to raise or lower the seat. - 22.2 1x Remote I-Spec EV
$123.00 - $130.00
Bearings for Chris King DropSet headsets. Chris King made-in-house bearings are designed to last a lifetime and are fully serviceable. We encourage you to service your bearings before resorting to replacement. 41mm Ceramic—PHS805 (Fits DropSet 3) 42mm Ceramic—PHS807 (Fits DropSet 2 and DropSet 4) 52mm 45° Ceramic—PHS809 (Fits DropSet 2) 52mm 36° Ceramic—PHS811 (Fits DropSet 3)
$130.00
38 Air Shaft Assembly for Fox suspension forks.
$165.00 - $207.00
The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary, made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 5 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 49mm headtube.
$207.00
Why We Make It Maybe we’re just a bunch of old softies, but the GripNut told the world we meant business when it came to headsets, and there are still a kajillion of them out in the world, giving good, daily service. It’s hard to talk about sustainability and not keeping making a cornerstone product like this one. Why You Want It You want to ride that classic bike of yours forever, and we don’t blame you. Our GripNut™ headset is designed for threaded forks that don’t require a cable hanger or additional spacers, allowing us to build a low stack height threaded headset with a unique collet locking system that stays securely adjusted. Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. As Chris King bearing tracks age and burnish, they actually get smoother, and all headsets are fully serviceable for years upon years of demanding riding. External upper and lower cups with the iconic, Chris King rounded profile adds timeless style to even the most modern bike. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - GripNut™ proprietary collet retention system - Options for 1” or 1-1/8” straight steerer tubes
Page 1 of 2 Next page