Mounts and parts for WASPcam Gideon, 9900, 9901, and JAKD cameras
Accessories and spare batteries for WASPcam Gideon, 9900, 9901, and JAKD cameras
CR2032 Lithium 3V battery for SIGMA computers, heart rate monitors, transmitters, and Micro Lights. Functions/Features Fits all 2003 and up twist lock computers, PC3, PC4, PC9, PC15, Shape watch, FIT watch, Onyx series HRM's, all HRM transmitters, and Micro Lights.
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager…
Sigma's replacement spoke magnet fits standard spokes and works with Sigma speed sensors.
CR2450 battery for SIGMA computers. Fits BC 1909, BC 2209, BC 2209 Targa, and ROX models.
Garmin's set of Bike Cadence Sensor Replacement Bands fasten your Bike Cadence Sensor (sold separately) to any size crank arm.
Garmin's lightweight elastic, nylon tether keeps your Edge 510 from traveling far in the event of a spill or rough ride. Simply attach your device to the tether, which provides a little extra safety in case your Edge pops out of the mount.
Use Garmin's Light Seal to replace the one on the back of your Forerunner 225 watch to block out ambient light and ensure proper heart rate detection.
The cadence magnet pedal insert is designed for tight installation situations. The principle is simple, yet space-saving: the power magnet attaches to any steel pedal spindle by magnetic force alone. From there, it triggers the cadence transmitter with each crank revolution.
Wireless mounting bracket for 2012, 2009 STS & 2006 DTS model computers. Handlebar or stem mount. Compatible models: BC 1106 DTS BC 1606L DTS BC1706HR DTS BC 2006 MHR DTS BC 1009 STS BC 1609 STS BC 8.12 ATS BC 12.12 STS BC 14.12 STS BC 16.12 STS Baseline 1200 plus
Replacement handlebar/stem mount for wireless CR 2450 computers. Compatible devices: ROX 8.0 ROX 9.0 ROX 8.1 Rox 9.1 BC1909HR BC2209MHR ROX 5.0 ROX 6.0
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence…
Firmly lock your VIRB X/XE in position with Garmin's standard tripod mount. Once attached the camera locks firmly into any standard tripod stand (sold separately) so you can start filming. This mount is great for stationary shots, time-lapses, and more • 1/4-20 thread
Sigma Sport's Cadence Power Magnet is the correct replacement magnet for any Sigma Sport computer featuring cadence (computers sold separately). It attaches to your crankarm with zip ties and double-sided tape (both included).
Power Spoke magnet for all Sigma computers. Fits round and bladed spokes.
Cadence sensor kit for Universal bracket only. * Note: mount sold separately
Keep your training on track with Garmin's Replacement Elastic Strap for your Heart Rate Monitor, which allows your wireless heart rate monitor (sold separately) to sit comfortably around your chest.
- Replaces crank arm mounted cadence magnet with pedal hex mounted magnet - O-ring presses tightly into any pedal's hex wrench fitting, choose 6mm or 8mm - 3 lengths, sizing refers to the distance magnet extends from crank arm
Keep your computer where you can read it with Delta's stem bolt-mounted Computer Caddy. It provides a mounting point for awkward or crowded bars. - Mounts securely using the stem bolt - Adds a space to mount up to two devices - Weight limit of 125g (0.28 pounds) per side
Fog is not an issue with Garmin's desiccant. Keep your VIRB X/XE camera shooting clear in conditions where humidity levels are high.
Protect your Garmin Edge 510 with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.
Protect your Garmin Edge 800, 810 or Touring with a form-fitting, silicone case and keep your mind at ease.
Garmin's Expander Watch Strap is the perfect accessory for extending your watch to fit over clothing and jackets. Simply buckle the expander onto your existing strap and you're ready to work out.
Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.
Protect your Edge 520 with these form-fitting, removable silicone cases.
- Allows rider to update firmware in G3 PowerCap. - Allows rider to change the hub’s CR2032 battery. - Used for the removal of the G3 PowerCap. - Removes the G3 PowerTap cap to update the firmware or change the hub’s CR2032 battery.
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Sigma's universal computer mount features a wired speed sensor, so you can use your Sigma cyclo-computer on a second bike. This kit comes with O-rings and a spoke magnet.
Need to hold down your GoKASE or DriKASE iPhone case? If you have multiple bikes, an ATV, or stroller, the Xtended X Bracket will allow multiple mountings with GoKASE or DriKASE iPhone cases. • Fits handlebar diameters 22mm to 34mm