Tools

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Ring Seals, Damper Sealhead, Air Spring Sealhead) - Boxxer RC C1 (2019)

200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Ring Seals, Damper Sealhead, Air Spring Sealhead) - Boxxer RC2 C1 (2019)

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

- 200 HOUR/1 YEAR SERVICE KIT (INCLUDES DUST SEALS, FOAM RINGS, O-RING SEALS, CHGR2 DAMPER SEALHEAD, DEBONAIR (SILVER) SEALHEAD—ZEB SELECT+/ULTIMATE A1 (2021)

3/8" drive Zyklop bit sockets. - 9-piece socket set on a robust textile belt, 3/8 - For manual and power tool operations (non-impact) - Smooth Twist to Unlock mechanism for a secure fit and simple removal of the sockets - "Take-it-easy" tool finder: color coding by size - Suitable for attachment to a wall, shelf, tool trolley and to the Wera 2go System - 1x Belt B 4 Zyklop socket set, 3/8" drive, 9 pieces - 9x 8790 HMB Zyklop 3/8" socket: 8.0x29.0, 10.0x29.0, 12.0x29.0, 13.0x29.0, 15.0x29.0, 16.0x30.0, 17.0x30.0, 18.0x30.0, 19.0x30.0 - 1x Socket rail B (textile belt), 9 location, unloaded, 45 x 310 mm - 1x Hook and Loop Fastener Strips 30, 200 x 30 mm

Sunlite's Fork Crown Race Setting Tool works on 1 and 1 1/8-inch steerer tubes. It sets the headset race perfectly on your fork without damaging it. Slip your race on the steerer, place the aluminum setting ring on top, slide the shaft over the steerer and give it a tap with a mallet. Viola! Your fork is ready to go.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: • 2 syringes/fittings • bleed blocks • Torx tool • Crow's foot • Bleeding Edge Fitting • DOT 5.1 hydraulic fluid

• For adding or replacing cage & rack mounts • Inserts are 10 to a bag

Handle/interchangeable blade system for fast replacement. Short handle for hard-to-reach areas. Suitable for the mounting of bits with 1/4" hexagon drive. - Handle/Interchangeable blade system for rapid exchange of the blade - Stubby bit hand holder: short compact shape for working in confined spaces - Ergonomic 2-component Kraftform handle for precise work - Take-it-easy tool finder: color coding according to profile and size - Compact, textile box with high robustness, low weight and volume. Suitable for docking with the Wera 2go system. - Bits with BiTorsion zone to cushion load peaks

Jagwire's Pro DOT Bleed Kit comes with the right fittings to bleed Avid, Formula, Hayes and Hope hydraulic-disc brakes for optimum braking performance. You can buy it with or without Finish Line DOT brake fluid.

The Muc-Off 8 in 1 Bicycle Cleaning Kit is perfect for any lover of bikes. Complete with Muc-Off's Nano Tech Bike Cleaner, Expanding Microcell Sponge, Soft Washing Brush, Detailing Brush, Claw Brush, Two Prong Brush, Bike Spray and Storage Tub this kit has pretty much everything you need to keep your bike looking nice and tidy. It makes a great Christmas or birthday gift for your bicycle-obsessed friends and family. This kit isn't style-specific either. No matter if you're into Road, MTB, Cyclocross or just getting from A to B, this 8-in-1 kit solves even the most annoying bike cleaning problems!

Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for comfort, the Park Cable Stretcher is a must for any serious mechanic.

Many bicycles will not shift or track properly because the front and rear wheels are not in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop outs of the frame may be misaligned. For years the accepted method to check the alignment of the rear drop-out was to run a string on either side. This method does work to some extent. However, it is not accurate because the measurement is not taken at the drop-out. With the Park Tool Frame Alignment Gauge, the alignment can be checked quickly and accurately at the drop-out. It includes a retractable pointer to fit all sizes and types of bicycles.

The HBH-3 securely holds handlebars in place on any bike in any position while in a repair stand. It's useful for brake bleeding, cable and housing routing, lever adjustment, or any scenario where you want to prevent the handlebars from rotating, including storage or working with the bike rotated upwards. With its articulating clamps and adjustable straps, the HBH-3 can easily be attached in a wide variety of positions onto almost any handlebar, seatpost, frame, fork, or repair stand. Anodized aluminum construction with soft rubber straps. - Straps install onto any round tube from 12mm to 60mm (0.5" to 2.4"), as well as most irregular and aero-shaped tubing found on bicycles - Rotating articulating clamps allow for secure installation onto virtually any bicycle in a wide range of positions - Usable extension length of 18" to 32" (45cm to 81cm) - Collapses and folds to 17" (43cm) for storage

Park Tool's TS-RK is a complete rebuild kit for the TS-2 truing stand. It is complete with the most commonly replaced small parts and the instructions needed to get your stand back into top working condition. In addition to making the stand more accurate and reliable, once installed, the new parts also allow the stand to be readjusted much more easily, should it be thrown out of adjustment. This is a great addition to the older TS-2 stands. If your stand has silver-colored shaft collars, upgrade with the TS-RK. The TS-RK includes the following: • 1 - #211S Main Shaft • 4 - #749-1 Bearing Washer • 2 - #748-1 Needle Bearing • 2 - #209-2 Shaft Adjusting Collar • 1 - #229 Spring • 4 - #232-2 Split Nylon Bushing • 2 - #235-2 Split Nylon Bushing • 1 - #222-SR Right Caliper Spring • 1 - #222-SL Left Caliper Spring • 1 - Set of Installation and Adjustment Instructions

Park's Threadless-Fork Saw Guide ensures a straight, accurate cut on threadless forks. Slide on the guide, clamp it down and the hardened-steel cutting slot ensures a perfect cut every time. You can remove as little as 1mm, too.

• Based on the True Pro, the FT-1 has a fixed axle holder and a more stable base • Portable, folding wheel truing stand with auto centering feature • Horizontal and vertical wheel trueness gauges, manual included • Fits 14"-29" wheels, 10mm axle or smaller (can true with tire installed)

This tool set consists of 4 / 5 / 6Nm TorqSockets that will work with any mini tool containing a 5 mm Allen wrench (or single 5 mm Allen wrench). Its advanced torque limit release design consistently applies precise torque values on component bolts for safety and prevents damage to expensive carbon parts. A carry case neatly stores three preset TorqSockets (4 / 5 / 6Nm) and the 5 most popular tool bits (3 / 4 / 5 mm hex & T20 / T25 Torx). - Added Feature: Rubber Strap, Carry case - Functions: 15 - Allen Bits: 3/4/5 mm - Tool Material: Hardened steel - Torx Bits: T20 / T25 - Torque Value: 4/5/6 Nm - Size: 8.2 x 5.1 x 2.7 cm / 3.2” x 2” x 1.1” - Weight: 130 grams

Tools for working with DT Swiss spokes. - Special for stainless spokes

- Essential mechanic tools to properly service and maintain all RockShox products - Clamps the shock body for easy maintenance

- Adjustable torque wrench with ergonomic design - Twist dial adjust torque in preset 4, 5, and 6Nm settings - Includes 3, 4, and 5mm hex bits and T25 Torx bit

- Essential bearing press for installation of bearings with a 10mm minimum ID - (1) 3/8 ACME threaded rod, (2) 30mm standoffs, (2) threaded handles

Keep your most commonly used tools close at hand with this clever, multi-function tool holder. The TK-4T was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas. The Tool Kaddie rotates for easy access and is molded from a durable composite material. - Bench Top Mount sits firmly on any flat surface - Specific slots and holders for 3-way hexes, screwdrivers, P-Handles, pliers/cutters - Generic slots and holders to hold a wide variety of tools and small parts - Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately) - Built-in receiver port for PTH-1 Paper Towel Holder (sold separately)

- A 37 function tool with pretty much everything you need to work on a bike - Two piece design allows for easy access of all tools -29 pro-quality vanadium steel tools: 1.5-L22-L2.534568 hex wrenches and 10mm hex socket T10T15T20T25 Torx wrenches 14/15g

This wedge bag has two compartments with foam inserts to keep tools jiggle free. - Features durable 1000 denier, wrap-around zipper, extra-long 3M reflective strip for added safety at night and a zippered expanding main compartment for added storage. Mounts and removes quickly with the innovative QuickClick system. - Built-in rain covers and two-piece rail fixer for easy removal Tool Kit Includes: - 2, 3, 4, 5, and 6mm Allen wrenches - T25 Torx - Phillips screwdriver - 8 and 10mm open wrenches - Universal Chain Tool with chain hook - 2 Tire Levers - Flypaper Glueless Patch Kit

Wera offers the Bicycle Set 1, an assortment of tools that is very mobile thanks to its compact and design-oriented textile folding bag, and offers solutions for the most common screwdriving situations when working with bicycles. The sturdy bag contains the bit ratchet Zyklop Mini 1 and 10 bits with all the benefits of Wera-Bit technology, specially adapted to the most common screw connections on a bicycle. - Compact 12-piece wrench set for bicycle applications, also for mobile use - Practical range for DIY assembly work and repairs - Suitable tools for the most common bolt profiles on road bikes, mountain bikes and e-bikes - Robust, surface-friendly, compact textile folding bag - Set includes bit ratchet Zyklop Mini 1 and extension