Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$39.95
The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it.
- Made in Minnesota to aerospace standards
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$8.49 - $25.49
Replacement axles for MX-2000 hubs.
Size: 14 x 100 x 165mm
- Supplier Part: KT-M18F
- MPN: 370666
- Front/Rear: Front
- Diameter: 14mm
- OLD: 100mm
Size: 14 x 110 x 180mm
- Supplier Part: KT-389R
- MPN: 370668
- Front/Rear: Rear
- Diameter: 14mm
- OLD: 110mm
Size: 3/8-inch x 100 x 165mm
- Supplier Part: KT-M17F
- MPN: 370667
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 180mm
- Supplier Part: KT-M88R
- MPN: 370682
- Front/Rear: Rear
- Diameter: 14mm slotted for 3/8-inch
- OLD: 110mm
$6.49
Replacement parts for Micro C-Drive Hubs.
- Supplier Part: Replacement #16 Clutch Ring
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$115.50
125 piece assortment of precision machined axle spacers (0.5mm to 5mm thickness). - Outside Diameter of Spacers: 16mm - Inside Diameter of Spacers: 10mm Kit includes: - (10) - 0.5mm thick spacers - (30) - 1mm thick spacers - (30) - 2mm thick spacers - (25) - 3mm thick spacers - (15) - 4mm thick spacers - (15) - 5mm thick spacers
$23.09
• 5mm skewer set (F+R hubs)
• Standard 5mm Hex release
• Black or Silver anodized finish
• Chromoly axles
$24.19
- Supplies full wheel illumination for 700c/29in wheels and smaller
- Approximately 40 hrs of battery life
- Water resistant design
- Includes 3 (AA) batteries
- Sold individually (1 wheel)
- Easy to install
$9.49
Replacement indicator chain for three speed Sturmey Archer hubs.
$12.59
- Variable widths
- Left: 28mm
- Center: 52mm
- Right: 28mm
- Length: 108mm
- Overall: 129mm
$4.89 - $6.09
- Replacement adjustable nut for three-speed internal hubs.
$34.00
Who knew we could make a thru axle disappear? The Maxle Stealth offers a light, low profile alternative to Maxle Lite.
Features
- 34g lighter than Maxle Lite
- Easy installation with a 6mm Allen wrench
$8.95
Lightweight and easy to install, there are Ritchey rim strips for all wheel sizes and types.
- Easily snaps over your rims
- Stretchy, tightly woven material provides a close fit and protects from abrasion
- Sold as a pair
- Not for tubeless set up
$15.50 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
$379.00
Convert your R45 hubs to XDR. Conversion kit is complete with axle and all driveshell internals for a plug and play swap to your R45 hub.
- Stainless Steel Bearings
- Compatible with SRAM Red eTap AXS, Eagle AXS, and all XDR and XD cassettes.
- Compatible with all R45 hubs.
- 130mm QR axle.
- Available in Silver or Black.
$114.00
This is where the bees live, the heart of the Chris King RingDrive. These parts are compatible with R45, R45D, and R45D Centerlock.
PHB572 - Drive and Driven Ring Set
$62.00
Chris King Driveshells contain two of our legendary made-in-house bearings, a machined bearing spacer spring to aid in preloading the bearings and a spacer spring o-ring. We encourage you to service your bearings before resorting to replacement.
Driveshell Inner Bearings require an R45 or Universal Hub Tool to remove and reinstall.
$62.00
Chris King made-in-house bearings are designed to last a lifetime and are fully serviceable. We encourage you to service your bearings before resorting to replacement.
-Steel Bearing
$120.00
Chris King hubs use oversized axles to supply a stiff and sturdy foundation for your wheels.
PHB761, PHB761B—130mm R45 QR, 11-Speed rear axle—Silver or Black
$9.99 - $13.49
WTP's Helix hub guards are designed to work on The Helixline of hubs, replacing the cones for a perfect fit without having to spread your dropouts.
- Includes heat-treated chromoly adaptor to replace hub cone nuts for a perfect fit
- Rear Hub guards are compatible with Helix V1 and Helix V2 freecoaster hubs and many other "KHE" style freecoasters on the market
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 126mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 137mm - 1 axle per bag
$1.80 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels.
- 14mm x 1mm (1411-AN) sold in pairs
- All others sold individually
$14.52
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - JoyTech, Joy U, KK 9mm x 1, front hub - Taiwanese front hubs with 9mm x 1 axle
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 24tpi - Diameter: 9.5mm - Length: 180mm - 1 axle per bag